NEO EPS as a filling material for heat insulation capability, the outer layers GYPSUM BOARD (Green, Red, Burgundy) or Fibercement produced using the ready to install interior / exterior walls. Light weight, can be extremely fast installation, at the same time provide sound and heat insulation and rigid structure (after installation as a whole is the entire wall surface) is preferred in the structures.

Each panel secured to the floor and the ceiling by means of special mounting elements, EPS filled wall makes it extremely resistant. In this way, EPS Filled walls, load-bearing on the well-known and is still in use until all internal partition walls (or even higher) can carry the load.

Instead of the outer layer of Gypsum Board; green, red or burgundy board or fibercement plaster will be used for different solutions for wet areas and other necessities.

By using YapıPAN, special silicone sealant, joints may be retained for many years without cracking. In addition, no need for the mesh band.

Standard wall thickness is 10 cm. Between 6 cm. and 20 cmi can be produced upon request. Standard wall width is 60-120 cm.


Door / window lintel is produced in different production price rates

Standard wall length is 250cm. From 150cm up to 320cm special size can be produced on the basis of the 
 project. Using steel frame system and add on top of wall, we can reach to 15 m length.


Gypsum Plate thickness is 18 mm. The minimum thickness could be 9.5mm for EPS and minimum 15mm for 
 Rock wool. Fibercement and MgO Board thickness can be at least 8 mm.

The density can be (80-150 kg/m3) for Rockwool and (16-24 kg/m3) for EPS.


Rock wool fibers are cut specially and glued to the panel vertically.


Average thickness of panels tolerance: + - 1 mm, respectively.


The walls may become the conduit and PVC conduit be placed in this space during the production process.


The number of channels must be specified when ordering cable and the factory must be confirmed. (Not Included 
 in prices)

NEO EPS CORE PLASTERBOARD

 

λ = 0.045 w/mK
Available Temperature: :-50oC - 75 oC Density: 16 kg./m3 - 40 kg./m3
Sizes: 60-120 cm. Width-250-300 cm.Length Thickness: 50 mm. - 600 mm.
EPS Fire Class: B2
Plasterboard Fire Class: A1

NEO EPS CORE, MOISTURE RESISTANT PLASTERBOARD

λ = 0.045 w/mK
Available Temperature: :-50oC - 75 oC Density: 16 kg./m3 - 40 kg./m3
Sizes: 60-120 cm. Width-250-300 cm.Length Thickness: 50 mm. - 600 mm.
EPS Fire Class: B2
Plasterboard Fire Class: A1

NEO EPS CORE BOARDEX

λ = 0.045 w/mK
Available Temperature: :-50oC - 75 oC Density: 16 kg./m3 - 40 kg./m3
Sizes: 60-120 cm. Width-250-300 cm.Length Thickness: 50 mm. - 600 mm.
EPS Fire Class: B2
Plasterboard Fire Class: A1

NEO EPS CORE FIBERCEMENT BOARD

λ = 0.065 w/mK
Available Temperature:-50oC ile 75 oC
Density: 16 kg./m3 - 40 kg./m3
Sizes: 60-125 cm. Width - 250-300 cm. Length Thickness: 50 mm. - 600 mm.
EPS Fire Class: B2
Fibercement Fire Class: A1

NEO EPS CORE, FIRE RESISTANT PLASTERBOARD

λ = 0.045 w/mK
Available Temperature: :-50oC - 75 oC Density: 16 kg./m3 - 40 kg./m3
Sizes: 60-120 cm. Width-250-300 cm.Length Thickness: 50 mm. - 600 mm.
EPS Fire Class: B2
Plasterboard Fire Class: A1

NEO EPS CORE OSB BOARD

λ = 0.040 w/mK
Available Temperature:-50oC ile 75 oC Density: 16 kg./m3 - 40 kg./m3
Sizes: 60-122 cm. Width - 244 cm. Length Kalınlık: 50 mm. - 600 mm.
EPS Fire Class: B2
OSB Fire Class: B2

PLEASE CONTACT US FOR DIFFERENT TYPES OF THICKNESS AND MATERIALS

CONTACT INFORMATION

 Company Name: YapıTÜRK TEKNİK İnş. Müh. Yapı Malzemeleri Tic. Ltd. Şti. 

 Address: Gaziler Mahallesi 246 Sokak Küçük Esnaf Sanayi Sitesi,

No:4A  Kepez/ANTALYA / TURKEY

 Phone: +90 242 464 10 02

Mobile: +90 532 393 16 95 

 E-mail: info@yapipansip.com

  • YapıPAN SIP Facebook
  • YapıPAN SIP Youtube
  • YapıPAN Instagram